It seems I can not change the rescan duration setting.
I change it and reply, but it will back to the default settings. How can I make changes happpen?
Thanks for the help.
rescan duration setting
rescan duration setting
- Attachments
-
- 剪貼簿圖片.jpg (185.28 KiB) Viewed 5361 times
Re: rescan duration setting
If you make a change to some other setting, is that change preserved after an Everything restart?
Do a search for Everything.ini.
Do you have more then one (in different locations)?
If so, is one being updated & the other (possibly) not?
It might have something to do with where you are storing your database?
Options | Indexes -> Database location:
And I'll take it that you are not right-clicking an Everything icon & "Run As Administrator".
(I'm not familiar with "pCloud", but it turns up in the FAT section?)
Do a search for Everything.ini.
Do you have more then one (in different locations)?
If so, is one being updated & the other (possibly) not?
It might have something to do with where you are storing your database?
Options | Indexes -> Database location:
And I'll take it that you are not right-clicking an Everything icon & "Run As Administrator".
(I'm not familiar with "pCloud", but it turns up in the FAT section?)
Re: rescan duration setting
Please make sure Everything is installed correctly:
- In Everything, from the Tools menu, click Options.
- Click the General tab on the left.
- Check Store settings and data in %APPDATA%\Everything.
- Click OK.
Re: rescan duration setting
Thanks for all the reply.
1. pCloud is mounted drive as exFat
2. my install & db setting path are the same (I:\EverythingDB not default path)
3. I only have one Everything-1.5a.ini in "I:\EverythingDB"
4. after I change settings, I will see the changes in Everything-1.5a.ini, but the everything's setting dialog is still old value after reopen the setting's dialog.
5. After restarting the Everything totally, the Everything-1.5a.ini will be overwrite to the default value.
So, can't I use none-default settings path ?
1. pCloud is mounted drive as exFat
2. my install & db setting path are the same (I:\EverythingDB not default path)
3. I only have one Everything-1.5a.ini in "I:\EverythingDB"
4. after I change settings, I will see the changes in Everything-1.5a.ini, but the everything's setting dialog is still old value after reopen the setting's dialog.
5. After restarting the Everything totally, the Everything-1.5a.ini will be overwrite to the default value.
So, can't I use none-default settings path ?
Re: rescan duration setting
I tried "Check Store settings and data in %APPDATA%\Everything."
The issue still existed. The behavior look like below :
1. After I change the setting in the dialog and click apply, the "Everything-1.5a.ini" will be modify to new values.
2. reopen the settings dialog, the value is still old values.
3. close the everything, it write it's settings to "Everything-1.5a.ini" and the values in "Everything-1.5a.ini" become old value again.
BTW, what's the difference between index the exFAT in FAT setting or just add whole drive into the Folders setting?
The issue still existed. The behavior look like below :
1. After I change the setting in the dialog and click apply, the "Everything-1.5a.ini" will be modify to new values.
2. reopen the settings dialog, the value is still old values.
3. close the everything, it write it's settings to "Everything-1.5a.ini" and the values in "Everything-1.5a.ini" become old value again.
BTW, what's the difference between index the exFAT in FAT setting or just add whole drive into the Folders setting?
Re: rescan duration setting
You can leave "Store settings and data in %APPDATA%\Everything" disabled.
Please make sure Everything has write permission to: I:\EverythingDB
It sounds like settings are locked for you.
What is shown under Help -> Troubleshooting information.
Please make sure your Everything-1.5a.ini is not set to read-only under I:\EverythingDB
Please make sure Everything has write permission to: I:\EverythingDB
It sounds like settings are locked for you.
What is shown under Help -> Troubleshooting information.
Please make sure your Everything-1.5a.ini is not set to read-only under I:\EverythingDB
Re: rescan duration setting
The Everything-1.5a.ini is writable. Let me express more clearly.
1. open everything-> tools->option->FAT
2. change setting to rescan every Suturday 3:00
3. click apply and ok
(everything is alive, just close the option dialog )
After that, I can see the Everything-1.5a.ini
1. modified time changed
2. the file content change from "fat_volume_update_day=0" to "fat_volume_update_day=7"
So, at this moment, it is very clear the everything already save the settings to the file.
And again, I do this again:
1. open everything-> tools->option->FAT
And I will found the rescan time still keep in "every day 3:00",
so I think everything does save the changes to the file (Everything-1.5a.ini) but not change the data in his memory
Then I close the everything totally, it will sucessfully save to the file (Everything-1.5a.ini) again, just with its memory data.
So the (Everything-1.5a.ini) back to the original settings.
So the file is not locked, but the data in the memory is not updated. So it will finally save the unchanged data into (Everything-1.5a.ini) when it is leave.
Finally, the other changes could be successfully changed, even in FAT page only some settings have this issues ( see my screenshot). If this is some problem caused by the writing permission, it should fail on all changes not only these settings.
1. open everything-> tools->option->FAT
2. change setting to rescan every Suturday 3:00
3. click apply and ok
(everything is alive, just close the option dialog )
After that, I can see the Everything-1.5a.ini
1. modified time changed
2. the file content change from "fat_volume_update_day=0" to "fat_volume_update_day=7"
So, at this moment, it is very clear the everything already save the settings to the file.
And again, I do this again:
1. open everything-> tools->option->FAT
And I will found the rescan time still keep in "every day 3:00",
so I think everything does save the changes to the file (Everything-1.5a.ini) but not change the data in his memory
Then I close the everything totally, it will sucessfully save to the file (Everything-1.5a.ini) again, just with its memory data.
So the (Everything-1.5a.ini) back to the original settings.
So the file is not locked, but the data in the memory is not updated. So it will finally save the unchanged data into (Everything-1.5a.ini) when it is leave.
Finally, the other changes could be successfully changed, even in FAT page only some settings have this issues ( see my screenshot). If this is some problem caused by the writing permission, it should fail on all changes not only these settings.
- Attachments
-
- 剪貼簿圖片 (3).jpg (410.46 KiB) Viewed 5283 times
Re: rescan duration setting
Everything is saving the settings to disk correctly.
The settings are not loading correctly for the options window.
This is a bug.
I'll have this fixed in the next alpha update.
Thank you for the bug report.
The settings are not loading correctly for the options window.
This is a bug.
I'll have this fixed in the next alpha update.
Thank you for the bug report.
Re: rescan duration setting
Thanks for the confirmation.
May I ask for the exFAT drive, using 1.5's FAT setting or adding whole drive into the Folders setting like 1.4 I did, which one is better? Or they are just the same?
May I ask for the exFAT drive, using 1.5's FAT setting or adding whole drive into the Folders setting like 1.4 I did, which one is better? Or they are just the same?
Re: rescan duration setting
They are exactly the same. (same indexing method and same monitoring methods)
The only difference is:
FAT:
Everything tracks the volume by volume GUID.
Folder:
Everything tracks the volume by path.
The only difference is:
FAT:
Everything tracks the volume by volume GUID.
Folder:
Everything tracks the volume by path.
Re: rescan duration setting
Everything 1.5.0.1362a fixes an issue with FAT settings being forgotten.