Statusbar for Rescan progress status

Have a suggestion for "Everything"? Please post it here.
Post Reply
raccoon
Posts: 1015
Joined: Thu Oct 18, 2018 1:24 am

Statusbar for Rescan progress status

Post by raccoon »

I notice when performing a Force Rebuild, or Rescan Now, there is no indication of progress displayed in the Statusbar. Have to open up the Index options to see what's happening. Request that this progress be included in the Status bar, as it is upon initial launch.
NotNull
Posts: 5167
Joined: Wed May 24, 2017 9:22 pm

Re: Statusbar for Rescan progress status

Post by NotNull »

It was already suggested and on the to do list (although I can't find the relevant thread at the moment).
void
Developer
Posts: 15096
Joined: Fri Oct 16, 2009 11:31 pm

Re: Statusbar for Rescan progress status

Post by void »

There will be a indexing progress bar in the status bar for the next major release.

Thanks for the suggestion.
JuergenF
Posts: 3
Joined: Mon Aug 14, 2017 9:59 am

Re: Statusbar for Rescan progress status

Post by JuergenF »

Was that already implemented ?
void
Developer
Posts: 15096
Joined: Fri Oct 16, 2009 11:31 pm

Re: Statusbar for Rescan progress status

Post by void »

It should be available in Everything 1.5, which is still in development.
raccoon
Posts: 1015
Joined: Thu Oct 18, 2018 1:24 am

Re: Statusbar for Rescan progress status

Post by raccoon »

Is there any way for us to play with these in-dev alphas? i'd like an invite <3
void
Developer
Posts: 15096
Joined: Fri Oct 16, 2009 11:31 pm

Re: Statusbar for Rescan progress status

Post by void »

I'm working hard to get an alpha release ready for testing.

Thank you for your patience.
Fred0815
Posts: 25
Joined: Sat May 01, 2021 10:50 am

Re: Statusbar for Rescan progress status

Post by Fred0815 »

I do not find where I may switch on a progress bar..
Ultimatively I rather need to see if the scan of a LAN folder hangs somewhere. As only beginning of the path is shown "Scanning:...." typically you cannot see whether it hangs.
Would it be possible to show the current sub-folder as well to show progress?
Thank you.
void
Developer
Posts: 15096
Joined: Fri Oct 16, 2009 11:31 pm

Re: Statusbar for Rescan progress status

Post by void »

A progress bar is in development.

I will look into showing the currently scanned folder to the progress bar tooltip.

Thank you for the suggestion.
void
Developer
Posts: 15096
Joined: Fri Oct 16, 2009 11:31 pm

Re: Statusbar for Rescan progress status

Post by void »

Everything 1.5.0.1259a adds the full rescan path to the rescanning tooltip in Tools -> Options -> Folders.

Adding a tooltip to the rescanning text in the status bar is still on my TODO list.
matt.baker
Posts: 5
Joined: Tue Jul 20, 2021 9:01 am

Re: Statusbar for Rescan progress status

Post by matt.baker »

I've downloaded 1.5.0.1269a (x64), but can't see the option to show the current path being scanned. It would be nice if this was shown in the status bar by default where it displays "Scanning <Top path>..."

Here:
Image
NotNull
Posts: 5167
Joined: Wed May 24, 2017 9:22 pm

Re: Statusbar for Rescan progress status

Post by NotNull »

You are looking in the wrong place. As @void said:
void wrote: Fri May 14, 2021 6:09 am Everything 1.5.0.1259a adds the full rescan path to the rescanning tooltip in Tools -> Options -> Folders.
And it looks like this:
2021-07-20 11_42_43-.png
2021-07-20 11_42_43-.png (25.3 KiB) Viewed 12702 times


Note:
void wrote: Fri May 14, 2021 6:09 am Adding a tooltip to the rescanning text in the status bar is still on my TODO list.
void
Developer
Posts: 15096
Joined: Fri Oct 16, 2009 11:31 pm

Re: Statusbar for Rescan progress status

Post by void »

This rescanning status is not shown for the initial index.
It is only shown when updating an existing index.

Showing the status for the initial index is on my TODO list.
Fred0815
Posts: 25
Joined: Sat May 01, 2021 10:50 am

Re: Statusbar for Rescan progress status

Post by Fred0815 »

it took me several attemps to really find the place where I can see the current scanned folder. Tooltip works and updates... BUT is it very counter intuitive! Why not show the scanned folder in the main GUI? instead of just "Scanning U:..."? for longer network names without a drive letter the share name is so long that it also does not display the current folder...
I've seen several requests here and finally it was just about taking it's time and sometime even a day or more... all those requests would not show up if there was some progress visible...

and btw.:
before a scan is finished there's no search possible... that is the next hassle to it...
void
Developer
Posts: 15096
Joined: Fri Oct 16, 2009 11:31 pm

Re: Statusbar for Rescan progress status

Post by void »

Thank you for your feedback Fred0815,

The next alpha update will show the full path being scanned in the tooltip.
The path can be really long so its best not to fill the status bar all the time.

The initial index scan should only occur once.

There is an option to do a background scan to allow you to search immediately.
However, it is not very efficient. (uses way more ram)

To scan folders in the background (allowing you to search immediately):
  • Copy and paste the following text into the Everything search box:
    /folder_background_index=1
  • Press ENTER in the Everything search box.
  • If successful, folder_background_index=1 is shown in the status bar for a few seconds.
Ram usage will return to normal after restarting Everything.



folder_background_index
raccoon
Posts: 1015
Joined: Thu Oct 18, 2018 1:24 am

Re: Statusbar for Rescan progress status

Post by raccoon »

Void: We are reading the version 1.4 thread I had started in 2019.
Here is a link to the sister thread that was posted in 2022 for version 1.5
viewtopic.php?f=4&t=11623
Fred0815 wrote: Thu Jun 30, 2022 12:32 pm ...
Fred0815: If you are using Everything 1.4, try giving the current in-development version a spin, Everything 1.5.
--> Everything 1.5 Alpha
Fred0815
Posts: 25
Joined: Sat May 01, 2021 10:50 am

Re: Statusbar for Rescan progress status

Post by Fred0815 »

Hello void team, thank you for the reply, I am already testing with 1.5.0.1315a.
Tried your recommendation:
/folder_background_index=1 => shows up in status bar after some seconds
but then it continues scanning without showing search results (I had >1mio results)

Maybe because I entered "/folder_background_index=1" while a scan is running?

My current workaround is:
kill Everything in Taskmanager and start again. After restart it continues as "rescanning..." and allows searching.
Actually, that's how I'd expect it ;-)
horst.epp
Posts: 1332
Joined: Fri Apr 04, 2014 3:24 pm

Re: Statusbar for Rescan progress status

Post by horst.epp »

Fred0815 wrote: Fri Jul 08, 2022 11:54 am Hello void team, thank you for the reply, I am already testing with 1.5.0.1315a.
Tried your recommendation:
/folder_background_index=1 => shows up in status bar after some seconds
but then it continues scanning without showing search results (I had >1mio results)

Maybe because I entered "/folder_background_index=1" while a scan is running?

My current workaround is:
kill Everything in Taskmanager and start again. After restart it continues as "rescanning..." and allows searching.
Actually, that's how I'd expect it ;-)
If you follow the suggested defaults
X Everything service
X Start Everything on system startup.
This way you would not have any wait time while searching.
void
Developer
Posts: 15096
Joined: Fri Oct 16, 2009 11:31 pm

Re: Statusbar for Rescan progress status

Post by void »

Everything 1.5.0.1316a will now show the current folder being rescanned in the tooltip for the status bar.
Post Reply