Page 1 of 1

Everything crashes (related to SageThumbs.dll ?)

Posted: Thu Feb 28, 2019 5:57 pm
by blaq
My C: drive was full when I logged in. Search Everything (SE) crashed and its window disappeared. Even though I have cleared about 20 GB of space on my system drive, SE still crashes:
  • Start SE
  • SE displays "Loading database", then "Updating dabatase".
  • It then populates its default file list and shows the number of files in the status bar.
  • Then crashes without user intervention.
  • If I activate the debug mode console, it unfortunately disappears when the main window does the same.
Event Viewer shows:

Code: Select all

Faulting application name: Everything.exe, version: 1.4.1.935, time stamp: 0x5c57c179
Faulting module name: SageThumbs.dll, version: 2.0.0.23, time stamp: 0x59117264
Exception code: 0xc0000409
Fault offset: 0x0000000000029c23
Faulting process id: 0x1d48
Faulting application start time: 0x01d4cf8c3097863d
Faulting application path: C:\Program Files\_File\Everything\Everything.exe
Faulting module path: C:\Program Files (x86)\_UI\SageThumbs\64\SageThumbs.dll
Report Id: 255c0b58-f415-4561-96a8-68fb75979194
Faulting package full name: 
Faulting package-relative application ID: 
What's my next step? Thanks.

Re: Everything crashes (related to SageThumbs.dll ?)

Posted: Thu Feb 28, 2019 8:07 pm
by NotNull
Your database (Everything.db) might be corrupted. Delete it and start Everything again. That will build a fresh database.

1. Make sure Everything isn't running:
- right-click the Everything icon in the system tray (if available) and choose Exit.

2. Delete Everything.db.
Depending on your settings, most likely places are either in the folder where Everything.exe is located or in your profile (c:\users\blaq\AppData\Local\Everything\everything.db)


If that doesn't fix the issue: The files on your harddisk might be corrupted.
To anayze/fix this:
- right-click C:\ in File Explorer
- Choose properties
- Activate the Tools tab
- Click Check

Re: Everything crashes (related to SageThumbs.dll ?)

Posted: Fri Mar 01, 2019 12:17 am
by void
Do you have Everything in thumbnail view? (View -> Thumbnails or View -> Details?)

Please try disabling thumbnails in Everything:
  • Complete exit Everything (right click the Everything system tray icon and click Exit)
  • Open your %APPDATA%\Everything\Everything.ini
  • Change the following line:
    icons_only=0
    to:
    icons_only=1
  • Save changes and restart Everything.

Re: Everything crashes (related to SageThumbs.dll ?)

Posted: Sat Mar 02, 2019 7:58 pm
by blaq
Thanks for the suggestions; I'll know where to look for them if Everything crashes in the future. Right now, Everything works fine. (I did reboot)

Thanks again for your help.

Re: Everything crashes (related to SageThumbs.dll ?)

Posted: Mon May 06, 2019 4:35 pm
by blaq
I followed your advice:
  • With Everything not running, I deleted everything.db.
  • With Everything not running, I disabled thumbnails.
  • I scanned the C drive; it came up clean.
  • I even uninstalled and reinstalled Everything.
I still get occasional crashes, with Event Viewer displaying:

Code: Select all

Faulting application name: Everything.exe, version: 1.4.1.935, time stamp: 0x5c57c179
Faulting module name: SageThumbs.dll, version: 2.0.0.23, time stamp: 0x59117264
Exception code: 0xc0000409
Fault offset: 0x0000000000029c23
Faulting process id: 0x4080
Faulting application start time: 0x01d504287465701e
Faulting application path: C:\Program Files\_File\Everything\Everything.exe
Faulting module path: C:\Program Files (x86)\_UI\SageThumbs\64\SageThumbs.dll
Report Id: 4f3915d2-02ba-4379-93be-14c99149811d
Faulting package full name: 
Faulting package-relative application ID: 
Both Everything and SageThumbs are up to date. What should I do next?

Re: Everything crashes (related to SageThumbs.dll ?)

Posted: Tue May 07, 2019 6:23 am
by void

Re: Everything crashes (related to SageThumbs.dll ?)

Posted: Tue May 07, 2019 9:19 pm
by blaq
Thanks. I've uninstalled the 64-bit version and installed the 32-bit version. I'll report back if I have any problems, or if I run without crashes for a month.

Re: Everything crashes (related to SageThumbs.dll ?)

Posted: Wed May 08, 2019 2:09 pm
by blaq
Everything x86 just crashed this morning. Here's the Event Viewer entry:

Code: Select all

Faulting application name: Everything.exe, version: 1.4.1.935, time stamp: 0x5c57c205
Faulting module name: SageThumbs.dll, version: 2.0.0.23, time stamp: 0x59117269
Exception code: 0xc0000409
Fault offset: 0x00023544
Faulting process id: 0x6828
Faulting application start time: 0x01d505231255748a
Faulting application path: C:\Program Files (x86)\_File\Everything\Everything.exe
Faulting module path: C:\Program Files (x86)\_UI\SageThumbs\32\SageThumbs.dll
Report Id: fadf0541-2b10-4663-b37a-b3ede61924b6
Faulting package full name: 
Faulting package-relative application ID: 

Re: Everything crashes (related to SageThumbs.dll ?)

Posted: Thu May 09, 2019 9:33 am
by void
Thanks for the reply.

sagethumbs.dll is still crashing Everything.

I've disabled icons and thumbnails in Everything 1.4.1.942 if you would like to give that a try:
https://www.voidtools.com/Everything-1.4.1.942.x64.zip
https://www.voidtools.com/Everything-1.4.1.942.x86.zip


To run this build:
  • Completely exit Everything (right click the Everything system tray icon and click Exit).
  • Open the Task Manager with Ctrl + Shift + ESC.
  • Click the Services tab.
  • Select Everything (if it exists), right click Everything and click Stop Service.
  • Overwrite your existing Everything.exe with one of the zipped Everything.exe above.
  • Open the Task Manager with Ctrl + Shift + ESC.
  • Click the Services tab.
  • Select Everything (if it exists), right click Everything and click Start Service.
  • Run Everything.exe.

Re: Everything crashes (related to SageThumbs.dll ?)

Posted: Wed May 15, 2019 5:12 pm
by blaq
Good news: in a week of constant use, your new build hasn't crashed once!